Pinger Plus+

Network IP Tester

The Power of Ping

The Pinger Plus+ is a new handheld tester used for installing and maintaining computer Local Area Networks (LANs) running the TCP/IP protocol.

The Pinger Plus+ uses the powerful PING function at either 10 or 100 Mbs to verify connectivity, check transmitted and received data integrity, indicate network traffic loading by measuring Round Trip Time, provide the MAC address of an IP Address and warns when the default gateway can not be located.



The Pinger Plus+ also identifies reversed polarity for improperly connected wire pairs and provides a Port Identification feature with selectable blink rates to identify which port on a hub or switch that a wall outlet is connected.

The Pinger Plus+ is the first low cost tester to provide Gigabit testing.
The Pinger Plus+ is an ideal tool for quickly testing proper LAN operation after completing a Move, Add or Change (MAC). Trouble calls are easily handled by verifying Link connection and running the comprehensive Ping test. Resolve “I can not connect to the Internet” problems with the DHCP Client mode that ensures a DHCP Server is available and displays IP address assignment. Remote office support can be provided by connecting the Pinger Plus+ to the LAN at a remote office trouble point and Pinging the tester over the Internet.

Detects Speed and Duplex of 10/100/1000 base TX Links
Verifies IP Address Assignment with the DHCP Client Test
Tests Connectivity Accross a LAN/WAN
Measures Packet Response Time to Determine Network Performance
Captures the MAC Address of an IP Address
Transmits Link Activation Signals for Port Identification
Phys, Char.
Dimensions 7.0 in x 3.2 in. x 1.4 in. / 178 mm x 81 mm x 36 mm
Weight 8.7 ounces / 247 grams
Network Types 10/100 Auto Negotiating
(Identifies a 1000baseTX only connectins, but can not test)
Power Supply Four AA alkaline batteries (included)
AC adapter for extended operation
Connector Type One RJ-45
(Combined port for LAN or NIC)
Operating Temperature 32°F to 122°F / 0°C to 50°C
Storage Temperature 14°F to 131°F / -10°C to 55°C
Firmware Upd.

The latest firmware for the PINGER PLUS+ is v1.89.

Question about updating firmware to v2.00, See FAQs.

I want to Upgrade my Pinger Plus+ firmware Version 1.89 to Version 2.00 to match the firmware version in my new Pinger Plus+. Where do I get the version 2.00 upgrade?
There is no need to upgrade from version 1.89 to 2.00. Firmware Version 2.00 address a production hardware issue and does not correct or modify any of the Pinger Plus+’s operations or capability. Firmware version 1.89 is available on the Psiber Website by following the Firmware Upd. link.
I want to upgrade my Pinger Plus+ firmware to the latest version. What do I need to do?
If your Pinger Plus+ firmware version is 1.89, you have the latest firmware for your Pinger Plus+ and you do not need a firmware update. If your Pinger Plus+ firmware version is earlier that 1.89 you can download the update by following the Firmware Upd. link from the Pinger Plus+ product page: ( ) and following the instructions.
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text.